---
title: "Kerlink i-series"
slug: "kerlink-i-series"
updated: 2026-03-31T08:57:57Z
published: 2026-03-31T08:57:57Z
canonical: "docs.connect.netmoregroup.com/kerlink-i-series"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.connect.netmoregroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Kerlink i-series

This applies to these models:

- iStation
- iBTS Compact
- iBTS
- iFemtoCell
- iFemtoCell-evolution
- iZeptoCell

**Steps:**

1. Logon to the gateway through SSH
2. If you are using a non standard SIM-card, the APN needs to be configured. This file will be kept during installation.

```
vi /etc/network/ofono/provisioning
```
3. Install Netmore custom liveburner:

```
curl -s https://docs.netmoregroup.com/downloads/gateway-config/kerlink-iseries/latest/installer.sh | sh
```
4. Reboot to complete the installation:

```
reboot
```
5. If not previously done, register the gateway in Netmore's LoRaWAN Portal. The output from the installer script will contain useful information for the registration.
6. After a couple of minutes the gateway should be seen as connected.