---
title: "Browan Pico Next"
slug: "browan-pico-next"
updated: 2025-09-17T07:11:34Z
published: 2025-09-17T07:11:34Z
canonical: "docs.connect.netmoregroup.com/browan-pico-next"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.connect.netmoregroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Browan Pico Next

### Reset

If the gateway is not new from factory, please perform a reset to default settings:

- Press and hold *Reset button* until Power LED becomes constant after flashing (~5 sec)
- or via Web UI: *System* -> *Restore* -> *Perform Reset*

### Configuration

1. For gateways with firmware version 1.2.99 or higher, you may need to first login in the Web UI and head to *System* -> *Administration* -> *Services* and turn on *SSH Remote Access*
2. Log into the gateway through SSH and run this:

```
curl -s -k https://docs.netmoregroup.com/downloads/gateway-config/browan/latest/installer.sh | sh
```

```
curl -s -k https://docs.netmoregroup.com/downloads/gateway-config/browan/latest/installer.sh | sh -s -- --apn "iot.melita.io"
```
  - Optionally you can specify a custom APN. The default value is `iot.melita.io`.
3. If not previously done, register the gateway in Netmore's LoRaWAN Portal. The output from the installer script will contain useful information for the registration.
4. After a couple of minutes the gateway should be seen as connected.